EXALUX™ CONNECT RX100S is a compact wireless DMX receiver especially designed to be powered through the USB connectors of a LED panel. RX100s can also run up to 10 hours with the small PowerBank battery.
The unit is compatible with any LED fixtures thanks to the flexible «connector on cable» system.
CONNECT RX100S, in short:
CONNECT RX100S wireless DMX receiver is fully compliant with all CRMX by LumenRadio™ transceivers, such as CONNECT TX100N and CONTROL ONE.
Following the country, the battery might not be included due the local customs restrictions. Please contact us for more information.
SKU : CNT.000.005
EAN code : 3760252031883
Availability : In stock
CONNECT RX100S is so small and light that it can be easily hidden in clothes and be forgotten.
With its internal antenna, you can easily use your RX100S without fear of breaking it.
The XLR connector on the cable makes the CONNECT RX100S truly universal.
It adapts to all lighting fixtures on the market regardless of the orientation of their DMX connector.
A very small powerbank will be more than enough to power the CONNECT RX100S for more than 10 hours. No need to wait for the unit to be recharged, simply replace it when it is discharged.
Need to run longer? Use a bigger battery!
Based on LumenRadio CRMX™ technology, EXALUX™ CONNECT RX100S brings DMX fidelity without any latency.
| Power Connection | Micro-USB |
| Interface | Link / Unlink (switch), Power, RF, Paired/ DMX signal, RF Level (LED) |
| Power Consumption | ~0,6W |
| Housing / Mounting | Polyoxyméthylène |
| IP Rating | IP20 |
| Certifications | CE, RoHS |
| Weight | 150g |
| DC Input Voltage | Min : 4.5VDC | Typ : 5VDC | Max : 5.5VDC |
| Storage T° | Min : -30°C | Typ : 25°C | Max : +80°C |
| Operating T° | Min : -20°C | Typ : 25°C | Max : +70°C |
| Standard / Technology | LumenRadio CRMX™ |
| Frequency | 2.402 ~ 2.480 GHz |
| Antenna | Internal, chip on PCB |
| RF Output | 20 dBm (100mW) |
| RF Modulation | GFSK |
| Range | Up to 50m |
| (depending on the transmitter and the environment) |
| Protocol | DMX512-A |
| Universe support | 1 |
| DMX frame rate | 0,8-830Hz |
| End to end latency | < 5ms |
| DMX Output | Neutrik XLR 5 pins Female |
The antenna cannot be replaced because it is mounted on the electronic board inside the unit.
CRMX is short for Cognativ Radio MultipleXer, a technology developed by LumenRadio™ Ab.
Wireless coexistence is when wireless technology can coexist with other wireless technologies without causing any interference or being interfered. Coexistence becomes crucial in environments where many networks such as theatres or concert halls coexist.
CRMX by LumenRadio™ patented Cognitive Coexistence technology allows our wireless solutions to ensure optimum performance even when other wireless systems are operating in the same area.
This achievement is possible because CRMX is based on the Frequency Hoping Spread Spectrum (FHSS) technology.
Both technologies can be used together. However, we recommend a distance of at least 50cm between CRMX equipment and Wi-Fi equipment.
The RX200N is an RDM-compatible DMX receiver that allows bidirectional communication with the DMX transmitter. The RX100S is not compatible with this standard but only with the DMX standard.
More about RDM : https://www.rdmprotocol.org/rdm/
