LEDMASTER NEO

EXALUX™ LEDMASTER NEO is a constant voltage LED dimmer designed to power LED fixtures on film sets.
Thanks to its high output capacity, LEDMASTER NEO allows to softly drive 480W of LED light (@24VDC).

LEDMASTER NEO is really ideal for dimming LED panels with a high output lumens.

The two individual outputs can be used in a different way:
> Tunable White Sync mode: both outputs operate simultaneously (240W+240W),
> Tunable White Dual mode: both outputs operate individually (240W+240W),
> Dual Channel: only one output is used at full power (480W).

LEDMASTER NEO, in short :

  • 4 independent channels, 480W Power Rating,
  • Manual / Remote control,
  • Built-In DMX/RDM 512 decoder,
  • Built-In CRMX / RDM Receiver,
  • 2000K>7000K patented CCT synthesizer,
  • 3 operating modes: Tunable White / Dual Channel / Special FX,
  • Master /Slave Operation,
  • 4 CCT presets (3200K, 4300K, 5000K, 5600K),
  • Trigger input,
  • 32kHz Flicker Free PWM Frequency,
  • Lock function,
  • Analog potentiometers for dimming,
  • Digital encoder for dimming, CCT and others settings,
  • LED display.

SKU : LMA.001.012

EAN code : 3760252033153

Availability : In stock

Cases of use

Tunable White Sync mode: both outputs operate simultaneously (240W+240W). CCT are the same on the 2 fixtures. Wireless remote control with the CONTROL ONE.

Tunable White Dual mode: both outputs operate individually. CCT can be set on each fixtures. Wireless remote control with the CONTROL ONE.

Dual channel: only output A or output B can be used. The rated power is 240W on each channel. Wireless remote control with the CONTROL ONE.

A closer look..

|A| Belt Fastening |B| Aluminium Enclosure |C| Mounting Holes
|D| Rugged Control Panel |E| Omni-directional Antenna

|F| Wireless Signal Level |G| Link Indicator |H| Link/Unlink switch
|I| CCT/Dimming Dial Knob |J| FX Indicator |K| Special Effects / CCT Output selector

|L| Trigger Input |M| DMX Input |N| Ouput A
|O| DC Input |P| Ouput B |Q| DMX output

What's in the box ?
LEDMASTER NEO UNIT
EXALUX POUCH
ADJUSTABLE NECK LANYARD
Specifications
FEATURES
TechnologyLow Side PMW with phase shift
Control ModeCCT / Dual Channel / Special FX
Dimming CurveLogarithmic
CCT Synthesizer Ranges2 000K > 6 500K
CCT Presets3 200K, 4 300K, 5 000K, 5 600K
PMW Frequency4 > 32 kHz
Built-In Special EffectsCandle/Fire, TV, Lightning, Paparazzi, Strobe, Tunnel
Controls“OFF-ON” (Switch)
Mode : Manual / DMX / Settings (Switch)
Manual CCT / Dimming Dial (Push Encoder)
CCT Adjust (Switch)
Dimming (Switch)
CCT Presets
Master/Slave Mode (Switch)
Wireless On/Off (Switch)
Fine / Coarse (Switch)
Lock (Switch)
Display4 digits LED display (Red)
Firmware UpdateBootloader, via XLR5 Input (a specific cable is required)
TECHNICAL SPECIFICATIONS
Power RatingOut A : 240W
Out B : 240W
Out A+Out B : 240W+240W
Output Voltage24VDC PWM
Current loadUp to 20A (up to 10A per channel)
Trigger InputJack 2.5mm
Housing / MountingAluminium, black painting
ProtectionShortcircuit / Overcurrent (Internal Fuse)
CertificationsCE, RoHS
Weight670g
DMX INTERFACE
ProtocolDMX512-A
RDM ANSI E1.20
Universe support1
DMX frame rate0,8-830Hz
End to end latency< 5ms
DMX InputNeutrik XLR 5 pins Female
DMX OutputNeutrik XLR 5 pins Male
RADIO INTERFACE
Standard / TechnologyLumenRadio CRMX™
Frequency2.402 ~ 2.480 GHz
AntennaOmnidirectional
2.4GHZ 2.0dBi, SMA
RF Output20 dBm (100mW)
RF ModulationGFSK
RangeUp to 300m
(depending on the transmitter and the environment)
OPERATING CONDITIONS
DC InputXLR 4 INPUT
24VDC
Storage T°Min : -30°C | Typ : 25°C | Max : +80°C
Operating T°Min : -20°C | Typ : 25°C | Max : +70°C
MECHANICAL
Download
EXALUX LEDMASTER NEO DATA SHEET (EN)
EXALUX LEDMASTER NEO USER MANUAL (EN)
EXALUX LEDMASTER NEO USER MANUAL (EN)