LEDZEP™ PUNCH 1X4 is a 60° narrow beam high power LED panel designed for the film industry. Lightweight, strong and powerful, LEDZEP™ PUNCH 1X4 panels are tailor-made for film and video on location.
LEDZEP™ PUNCH panel differs from other LED panels by its unique design, based on more powerful narrow beam emitters (60°). This new design makes it possible to deliver up to 3 times more illuminance than any other 120° SMD LED panel.
LEDZEP™ PUNCH 1X4, in short :
LEDZEP™ PUNCH 1X4 is the ideal fixture on location, for your key or ambient lights. The kit comes with cables (compatible with each country’s requirements), dimmer and power supply.
SKU : LZP.100.001
EAN code : 3760252033160
Availability : In stock
|A| High Power 60° Emitters |B| Hook-And-Loop Fastener
|C| Rugged Corner |D| Threaded Hole for mounting
|E| Power Cable |F| Quick Realease Mount
|G| XLR 4 Pins Male |H| Polypropylene Housing
The LEDZEP™ PUNCH 1X4 light engine is based on 60° focused LEDs, producing an illuminance 3 times higher than a similar panel equipped with 120° LEDs.
With the LEDZEP™ PUNCH 1X4, you will obtain hard and powerful light (without diffuser) but also a soft and intense light, thanks to the removable SnapBox from DoP Choice®.
LEDZEP™ PUNCH 1X4 is, therefore, very versatile on location and will be able to meet all your needs.
LEDZEP™ PUNCH 1X4 is made of high-quality LEDs, selected in a colour space focused on 3 McAdam Ellipses. This panel ensures a light close to perfection. It also garantees that the proximal colour temperature is the same from one LED panel to the next.
With a CRI (Ra) above 95, LEDZEP™ PUNCH 1X4 makes it possible to faithfully render all colours without any compromise, whatever the set color temparature is.
We have taken particular care when choosing our electronic components used in the LED engine and dimmer to reach one main objective: producing maximum light with minimum energy consumption. LEDZEP™ PUNCH 1X4 has the best lumen/weight ratio on the market!
With LEDZEP™ PUNCH 1X4, you will not make any compromise between light and battery saving!
Light, strong and powerful, LEDZEP™ PUNCH 1X4 are tailor-made to be on the go and on location lights.
LEDZEP™ PUNCH 1X4 is made of light and strong materials.
Areas, which could potentially be damaged by falls, are protected or reinforced to limit the damage. LEDs are obviously protected by a polycarbonate screen to prevent damage when being used.
Because of its lightness, LEDZEP™ PUNCH 1X4 can be quickly installed on a wall surface (using adhesive fasteners), on a pole (overhead setup), or even just on a baby stand.
|LED Engine||2700K > 6500K Tunable White LED Matrix|
|60° Narrow beam High CRI emitters|
|32kHz PWM frequency compliant|
|Power Consumption||@2700K : 175W|
|@6500K : 132W|
|Input||NEUTRIK XLR4 Male (1)|
|Cable length : 44mm|
|Standard Mount||Twist-on center mounting plate|
|CCT||2700K± 5%||6500K± 5%|
|Flux (lm)||12 350 ± 5%||11 696 ± 5%|
|Illuminance (lx)||1 meter : 8 088||1 meter : 9 649|
|2 meters : 2 022||2 meters : 2 142|
|3 meters : 899||3 meters : 1 072|
|duv||-2.60-03 ± 5%||2.89-05 ± 5%|
|Efficiency (lm/w)||69,13 ± 5%||86,52 ± 5%|
|Beam Angle / Fwhm (°)||60||60|
|Colour rendering||Ra : 96||Ra : 97|
|R9 : 98||R9 : 87|
|R13 : 95||R13 : 97|
|R15 : 97||R15 : 94|
|TLCI : 99||TLCI : 99|
|TM30-18 : 94||TM30-18 : 93|
|Power Rating||Out A : 240W|
|Out B : 240W|
|Out A+Out B : 240W+240W|
|DC Input||Neutrik XLR 4 pins Male|
|DC Output||#1 : Neutrik XLR 4 pins Female,|
|24VDC PWM, 240W max|
|#2 : Neutrik XLR 4 pins Female,|
|24VDC PWM, 240W max|
|Current load||Up to 20A (up to 10A per channel)|
|DMX input||Neutrik XLR 5 pins Male|
|DMX Output||Neutrik XLR 5 pins Female|
|Control mode||CCT : 2600K>6200K|
|CCT : 2700K >6500K|
|CCT : 2200K >5600K|
|CCT : 2200K >6500K|
|Special Effects : Candle/Fire | TV | Lightning | Paparazzi | Strobe | Tunnel|
|CCT Presets||3 200K, 4 300K, 5 000K, 5 600K|
|Housing / Mounting||Aluminium, black painting|
|Protection||Shortcircuit / Overcurrent (Internal Fuse)|